Lifting Hook

Approx. Rs 495 / PieceGet Latest Price

Approx. Rs 1,652 / PieceGet Latest Price

• • Never return damaged or contaminated plate clamps to storage. They should be dry, clean and protected from corrosion.
  • Plate clamps should not be dropped or thrown down.
  • Do not use defective plate clamps or accessories.
  • Always use horizontal plate clamps in pairs attached to the correct type, size and length sling for which they are designed.
  • Position the clamps correctly. Place the clamps over the centre of gravity of the plate. If the plate is long and has a tendency to bend use two or more pairs of clamps in conjunction with a spreader beam, equally disposed about the centre of gravity, to minimise the sag. Ensure the clamps face each other to balance the horizontal clamping forces.
  • If the plates are likely to sag transversely, clamps which grip the plate by a cam must be used.
  • Care must be taken to ensure no one clamp takes more than its SWL.
  • Put the clamps onto the plate as far as they will go.
  • Do not use clamps at an angle to the edge of the plate unless they are designed for the purpose.

WARNING: Some of these clamps are designed to be used with an endless loop of chain whilst other are for use with a two leg sling. Under no circumstances must an endless loop be substituted for a two leg sling or vice versa as this will alter the geometry and therefore the gripping forces on which the clamps rely for their safe operation.

Additional Information:

Approx. Rs 118 / PieceGet Latest Price

Approx. Rs 295 / PieceGet Latest Price

Approx. Rs 118 / PieceGet Latest Price

Approx. Rs 2,120 / PieceGet Latest Price

Approx. Rs 140 / PieceGet Latest Price

Approx. Rs 530 / PieceGet Latest Price

Approx. Rs 2,360 / PieceGet Latest Price